Products

  • Rotary Drilling Rig KR220GC

    Rotary Drilling Rig KR220GC

    Hammer & Steel sells, rents, and services the TYSIM KR220GC drilling rigs that are designed to cover a wide range of processes including bored piles with kelly bars, continuous flight auger (CFA), micro-piles, displacement piles and soil mixing.

  • Rotary Drilling Rig KR220D

    Rotary Drilling Rig KR220D

    TYSIM rigs are self-mounting, easily transportable and designed to giving the best drilling solutions.
    The hydraulic drilling rig KR220D has been specially designed for suiting the following applications:
    - Power head classification setting, increase the rock entry mode;
    - Single layer wire rope maximizes the service life of the wire rope;
    - Strong rotating performance, to ensure the construction stability and safety, but also to ensure the vertical degree of piling;

  • KR50

    KR50

    1.Dual drive power head, maximum output torque: 100KN.M
    2.Expansion chassis(double-width ). The operating width is 3600mm and the transport width is 2600mm. The equipment has good passability and high construction stability.
    3. The maximum drilling depth is 16m. It can realize the large drilling diameter construction through different drilling tools and construction methods;
    4. High traction for walking. The whole machine is flexible can meet the requirement of 20° ramp for normal driving;
    5. Solid chassis which is low center of gravity and easy to move in short distance.

  • LOW HEADROOM DRILLNG RIGS(LHR)KR300DS

    LOW HEADROOM DRILLNG RIGS(LHR)KR300DS

    The KR300DS drilling rig in short mast configuration has a working height of only 11m. allowing the rig to be used in low headroom areas under bridges, power lines inside buildings, etc.

     

  • Rotary Drilling Rig KR300D

    Rotary Drilling Rig KR300D

     

    TYSIM piling machinery boasts high efficiency with its performance higher than the common similar piling machine in the world. The reliable structure ensures the piling machine can operate in harsh working condition. TYSIM piling rigs is widely used in civil engineering, city construction and railway piling construction. As drilling equipment, the piling rigs can be used in clay, pebble bed and rock. The powerful engine and reliable components make a solid foundation for rotary drilling rig to achieve excellent performance. And the intelligent design make safer operation and less troubleshooting cost.

     

  • Rotary Drilling Rig KR300C

    Rotary Drilling Rig KR300C

    The TYSIM line of high production hydraulic drilling rigs feature heavy-duty cat carriers with impressive torque and crowd capabilities designed for hard drilling conditions and large diameter applications.

  • KR110D

    KR110D

    1.Expansion chassis(double-width ). The operating width is 3600mm and the transport width is 2600mm. The equipment has good passability and high construction stability.

    2. High traction for walking. The whole machine is flexible can meet the requirement of 20° ramp for normal driving;

    3. The whole machine is designed in accordance with EU standards, with high construction stability;

    4.Customized high-power engine with dual drive power head and large output torque, which can meet the requirements of complex formation construction and high construction efficiency;

    5.  It can realize the large drilling diameter construction through different drilling tools and construction methods;

    6.Customized low mast, lower center of gravity, improve construction stability

  • KR40

    KR40

    Technical Specification Rotary Drilling Rig Model KR40A Max. torque 40 kN.m Max. drilling diameter 1200 mm Max. drilling depth 10 m Max. cylinder thrust 70 kN Max. cylinder trip 600 mm Main winch pull force 45 kN Main winch speed 30 m/min Mast inclination(Lateral) ±6° Mast inclination(Forward) -30°~+60° Working speed 7-30rpm Min. radius of gyration 2750mm Max. pilot pressure 28.5Mpa Operating height 7420mm ...
  • Casing Pipe

    Casing Pipe

    1)The technical parameters and processes of the products are in line with the Bauer standard; 2)Deformation and accuracy is strictly con trolled though heat treatment,each casing is interchangeable; 3)Besides Bauer ,casing is also suitable for Soilmec, Casagrande and other brand; Casing Dia. Inner Shell THK. Outer Shell THK. Casing THK. Bolts No. Weight(3 meter) 680-600 8 12 40 8 1090 880-800 8 12 40 10 1335 1080-1000 10 16 40 10 2180 1280-1200 10 16 40 12 2480 1600-1500 12 20 50...
  • Kelly bar

    Kelly bar

    Product Description Understand what customers need and provide what customers want, TYSIM not only supply Kelly bars for drill rigs of world’s top brands, but also provide one-stop solution for the world foundation construction users. While providing customized quality products, our services will leave you with no worries…

  • Buckets and Augers

    Buckets and Augers

    We purchase top quality raw materials from leading raw-steel factory.
    Our drilling tools can be customized depending on kinds of rigs and site conditions.
    We require high quality of welding, therefore we employ at least 8 years experienced welders.
    Advanced welding and design ensure the products

  • Vibroflot

    Vibroflot

    The Vibroflot is normally suspended from a standard crawler crane or a piling rig.

1234 Next > >> Page 1 / 4